Build your home page product rows as small selections, each with its own job: products that have sold steadily over recent weeks and have enough stock in every size, genuinely new arrivals, a selection that fits the season or the gift period, and high-margin products that also sell when people see them. Whatever row it is meant for, keep a product off the home page if its size run is broken, its stock is down to a few units, it is returned often or its reviews keep repeating the same complaint. Taken together, the rows should also show the range of what you sell, because a visitor who sees only one product group on the home page may conclude that the site sells nothing else.
Using these criteria, you can decide how many rows to put on the home page, in what order to stack them on a phone and which products go into each one. You will also know how often to refresh the rows and what to check in your sales and stock reports when you do, and how to read in your analytics tool how many visitors a row sends to product pages and to the cart.
First, check how many visitors see your home page
Before you pick the products to feature, measure how much weight the home page carries in your store. Your analytics tool’s landing page report shows how many visits start on the home page; we showed how to read that report by page type in our article on placing sale announcements page by page.
The landing page report only counts the first page of a visit. To include visitors who tap the logo on a product page and return to the home page, open the Pages and screens report under Engagement in the Reports menu of Google Analytics 4 (GA4). Switch the table’s dimension to Page path and screen class, then compare the active users on the “/” row with the report’s total row. If, for example, 12,000 of 40,000 active users in a month saw the home page, your home page reaches three in every ten visitors.
Read the home page share and where its visitors come from
If that share is high, the home page is one of your most-viewed showcases and every criterion below has a direct effect on sales. If the share is low and most visits come from ads or search and begin on product pages, the question of which products your home page should show comes after fixing what is missing on your product pages. Also look at where the sessions that start on the home page come from. If direct visits and visits from the link in your Instagram profile dominate, a large part of the people who see your home page probably know you already; you will use this finding when you set the order of the rows on a phone.
Give each row a single job
If your theme lets you add several product rows to the home page (some platforms call them “showcases”), write down what each row should tell the visitor before you fill it. One row can show what sells most in your store, another what has just arrived, a third what suits the season or an upcoming occasion. Don’t open a row whose job you cannot state in one sentence, and don’t put the same product in two rows; the second appearance wastes part of a screen that is already narrow on a phone.
Rows you curate by hand show the same selection to everyone who arrives. Showing options that go with the product a visitor is looking at is a separate job: Pushouse’s smart product recommendations use sales data to put related products in front of the customer, so a visitor looking at a coffee sees cup options in the recommendation area. Don’t fill a home page row with complementary products like these; to someone who hasn’t come across the coffee yet, a cup says very little about your store.
Proven best sellers
Only put products whose sales are spread over the last few weeks into the best-seller row. A one-day spike on a campaign day or after a social media post does not show that a product will sell every week. Read sales by order count as well as by units: a product whose 30 units came from a single corporate order tells you something different from a product chosen by 30 separate customers. Then work out how long the stock will last. For example, if a product has sold an average of 5 units a day over the last four weeks and 35 units are left in the warehouse, you have about a week of stock, and it may run out even sooner once the product gets more views on the home page.
If you also want to show what has been moving in recent days, Pushouse’s products of the week module lists the best sellers of the last 7 days in a window that opens when the visitor presses a button, so it is not a fixed section of the home page. You can keep the home page row for products with deep stock and sales spread over several weeks, and leave the week’s fast movers to this window.
Base the “Best sellers” title on sales data
If you title a row “Best sellers”, pick the products from your sales report and write under the title which period you looked at. A “best seller” label is a social proof signal; if it is not based on sales, it steers the visitor with false information. Under Article 9 of the Ticari Reklam ve Haksız Ticari Uygulamalar Yönetmeliği, Türkiye’s regulation on commercial advertising and unfair commercial practices, advertisers must prove that the claims in their commercial advertising are true, so keep the sales report a label is based on. If you choose products without looking at sales, let the title say so. The title and the line beneath it could look like this:
Best sellers · Most ordered in the last 30 days
New in · Products that arrived this week
Our team’s picks · Pieces we chose for their fabric and stitching
New arrivals
For visitors who know your store and drop by often, the new arrivals row shows what has changed since their last visit. Only include products from the latest delivery, and don’t keep a product labeled “new” for weeks; when a new batch arrives, move the previous one back to its categories. If your platform fills this row automatically by the date a product was added to the system, check the list by hand as well: an old product you uploaded again can enter the row even though it is not really new. A new product with no reviews yet is fine, but it should not go on the home page before its photos, measurements and full size range are ready.
Seasonal and gift selection
The seasonal row changes with the calendar: coats and boots when the first cold days arrive, New Year gifts in the last weeks of the year, jewelry and perfume before Valentine’s Day. Building a gift selection around price bands gives visitors who don’t know what to buy for whom a place to start; a row such as “Gifts under 1,000 TL” puts the products that fit the visitor’s budget side by side. If you offer gift wrapping or a gift note, say so in the row’s description line. Ahead of the New Year, also set the last order day for delivery in time, based on your carrier’s delivery times, and add it to the same line.
Instead of guessing which product groups belong in the seasonal selection, look at your site search logs; the needs visitors search for but cannot find on the home page show up there. We explained how to read search logs and zero-result searches in our article on analyzing customer behavior.
High-margin products that sell when seen
Don’t put a high-margin product on the home page just because of its margin; it also has to sell when people see it. According to Google’s ecommerce measurement help page, the Ecommerce purchases report in GA4 shows for each product how many times it was viewed and added to the cart. Divide items added to cart by items viewed to get each product’s add-to-cart rate. Profitable products whose rate is above your store average but which get few views are strong candidates for the home page; since the people who see them add them to the cart more often than average, more visibility can pay off directly. For a profitable product that gets many views but few add-to-carts, fix the product page before you move it to the home page; we covered the information that drives decisions on a product page in our guide to growing online store sales.
Leave out products with broken size runs, low stock or frequent returns
If a visitor who clicks a product on the home page cannot buy it, or buys it and sends it back, the product’s place in the row has been wasted. Check four things before you put a product in a row.
The first place to look is the size and color breakdown, because total stock is misleading. If 36 of the 40 shirts in stock are XS and XXL, the product is effectively sold out for most visitors looking for an M or an L. If your platform has a setting that hides sold-out products in showcases, turn it on, but it may not catch a broken size run: a product with a few sizes left does not count as sold out, so it stays in the showcase. If your platform allows it, pull the stock report for home page products at variant level and make sure there is stock in each of the product’s best-selling sizes.
Check remaining stock and the return rate
Remaining stock is the second criterion. Repeat the calculation you did for best sellers for every candidate product, and don’t put a product in a row if its stock will not last until the next refresh day. If a product sells out while it is in the row, the row either shows a gap or a card that says “Sold out”.
Look at the return rate too. If a frequently returned product sells more on the home page, returns go up as well. Work out each product’s return rate from your order and return reports and compare it with products in the same category; return habits can differ widely between categories, so don’t compare shoes with mugs. If the reasons for returns cluster around one point, such as “runs small” or “the color differs from the photo”, fix the information on the product page first and only then put the product on the home page.
Look for complaints repeated in recent reviews
In reviews, read the latest ones rather than the average rating. If the average is high but the last few reviews repeat the same complaint, such as “the seam came apart” or “the fabric is thin”, the latest batch may differ from the earlier ones; take the product out of the row until you understand the problem. Don’t apply this rule to products that have no reviews yet; they can stay in the new arrivals row.
How many rows on a phone, and in what order?
Once you have chosen the rows one by one, check whether the home page as a whole tells visitors what your store sells. In usability tests run by Baymard Institute, many participants misunderstood what kind of site they were on, or underestimated its product range, because the home page showed too narrow a selection of product types. At the clothing store Nicce, a female participant saw that most of the products on the home page were aimed at men, concluded that the site mainly sold menswear and hesitated to explore it, although the store catered equally to women and men. Baymard recommends showing at least 40% of your product types on the home page. Whether you show them through category links or individual products does not change how accurately visitors understand your range.
This check matters even more on a phone. On desktop, categories can stay visible in the menu at all times, while on a phone the menu stays closed; Baymard writes that mobile users rely on the home page to work out what kind of store a site is until they open the main menu. Do the check on paper: list your product types, scroll through your home page on a phone from top to bottom and tick every type you see in the rows. If a home textiles store that sells ten product types shows only duvet covers, towels and blankets on its home page, it needs to show at least one of curtains, bathrobes or tablecloths, either with a category row or by swapping a few products in the existing rows.
Number of rows, their order and scrolling cards
The number of rows is set by the number of jobs you can fill with products that pass the screening. Don’t open a row you cannot fill; on a phone, every extra row pushes the ones below it further down. Set the order based on what you found in the first section. If the home page is mostly seen by visitors who already know you, put new arrivals at the top. If first-time visitors dominate, for example because your ads link to the home page, put proven best sellers and the category row that shows your range first. In the gift season, move the seasonal row up one step and return it to its place when the season ends.
In a horizontally scrolling row, only a few cards fit on a phone screen at once. Put the strongest products at the start of the row and leave part of the last card visible on screen; that is how visitors notice that the row continues. At the end of each row, add a “See all” link to a full list built on the same logic.
Build a home page row from your Reels videos
If you present your products in Instagram Reels videos, the videos can be a home page row too. Pushouse’s Show Instagram Reels on Your Website module can serve as a “Social Showcase” on your home page; you link each video to a product from the panel, and the “Buy” button on the video card takes the visitor to that product. You decide which videos come first. Products linked to videos need to pass the same screening: a video about a product whose sizes have sold out sends the visitor to a page where they cannot buy. We covered which clips suit the home page and which suit a product page in our guide to choosing the product pages for Reels videos.
Refresh rows with sales and stock data
Match how often each row is refreshed to how fast the data behind it changes. For most stores, check the stock and size availability of home page products at least once a week, and more often in busy sales weeks. Rebuild the best-seller row on the same day every week from the sales report for recent weeks; change new arrivals as new products come in, and the seasonal row according to the calendar. Keep the slots you give to high-margin products unchanged for at least two weeks; if you change them sooner, you won’t be able to measure which product worked.
Note every change with its date: which product you put into which row, and which one you took out and why. Don’t change more than one row on the same day; when sales shift the following week, only changes made one at a time and the notes you kept will tell you why.
Rebuild rows after campaign weeks
In campaign weeks such as 11.11 or the end-of-November sales, the top of the home page goes to the sale announcement; we explained where it goes and what it should say, together with the legal notes on discount badges, in our guide to where sale announcements belong. When the campaign ends, don’t build the best-seller row from those weeks’ sales; a product that sold at a discount may not sell as fast once it is back at full price. Rebuild the row from the weeks before the campaign or from the sales that build up after it.
Measure what your rows send to product pages and the cart
To see whether a row works, measure separately how often its products are seen and how often they are clicked. Google’s ecommerce measurement guide describes sending a view_item_list event when a visitor is shown a list of products and a select_item event when they select a product from that list. If your theme or platform sends these events with a separate item_list_name value for each home page row, open a new exploration in GA4’s Explore section. From GA4’s list of dimensions, put Item list name in the same table as the Items viewed in list and Items clicked in list metrics. Dividing items clicked by items viewed gives you each row’s click-through rate.
Both metrics are item-scoped. According to Google’s help page, item-scoped and event-scoped dimensions and metrics can’t be combined in reports and explorations, so don’t add a metric such as event count to the table. If your theme also sends each product’s position with the index parameter, the Item list position dimension from the same list shows which card in the row was clicked; this tells you whether visitors on a phone also click cards beyond the first few in a row. Compare your rows with one another; don’t aim for a click-through rate published for other stores, because the number of cards, the screen size and the product type all change the result.
No list names? Use a path exploration
If all your home page rows come through under a single list name, or with no list name at all, ask your agency or theme developer to give each row its own name. Until then, use the Path exploration template in Explore: choose page path as the starting node, enter the home page address (“/”) and see which pages visitors move to after the home page. This method does not tell you which row a visitor came through, but it shows whether people actually click through to the products on your home page.
Measure the cart effect and adjust each row
Read the effect on the cart at product level. In the Ecommerce purchases report, compare the views and add-to-carts of each product you put on the home page for the two weeks before it entered the row and the two weeks after. If a campaign or heavy advertising falls in one of the weeks you are comparing, wait for the next quiet period.
Read the results row by row. A row that is seen often but clicked rarely suggests that its products or its title don’t appeal to visitors, or that the row sits too far down the page; change its position first, then its products, and measure again. For a product that is clicked but rarely added to the cart, check the product page: size options, price or delivery information may be what stops the visitor. We explained how to find what is missing from a product page in our article on the information that builds trust on product pages. Keep products that are both clicked and added to the cart in place at the next refresh and track their stock first. You can apply the same criteria to on-site areas beyond the home page, and talk to our team about which one to start with.



